Gigabyte G292-Z20

Gigabyte G292-Z20 (2U, 8 GPU)

Proven
CPU	Single-socket AMD EPYC
Runs on	Bare metal
P2P	Each GPU pair sits on its own PCIe switch: good P2P within a pair, slower between pairs
Settings that mattered	Ships with risers for 8 cards and dual 2200 W PSUs; aggressive fan tune or thermal-target fan control to cut noise
Tested by	@1a2b3c0967
Source	Discord message
Confirmations	Reproduced by @cmdrwaka324, 2026-10-26 · details Reproduced by @danske1, 2026-10-26 · details Confirm on your own card

A 2U single-socket EPYC GPU server that takes 8 cards. Several members run it; the trade-off is noise.

What people report

• 1a2b3c0967 runs 8 cards in a G292. It ships with dual 2200 W PSUs and risers for 8 cards. It sounds like a jet engine, but cools far better than the mining frame he tried first. Source: @1a2b3c0967, 2026-10-04
  Source: @1a2b3c0967, 2026-10-04
• cmdrwaka324 runs 5 CMP 170HX, 2 RTX 3090 and an Intel B60 in one: good BIOS and out-of-band management, an aggressive fan tune keeps idle noise like a big box fan, and the cards stay cool even in a garage in summer. Source: @cmdrwaka324, 2026-10-25
  Source: @cmdrwaka324, 2026-10-26
  Source: @cmdrwaka324, 2026-10-26
• danske1 has one too: the stock fans are ear-piercing, and you need EPS-to-EPS cables because adapters do not fit in the back section. Source: @danske1, 2026-10-26
• neapopa calls it a steal for an 8-card setup. Source: @neapopa, 2026-10-25
• Prices seen: about 500 USD (Morrowmake), 1 to 1.5k USD used (PersonA). 1a2b3c0967 linked an eBay search for the G292-Z20; Morrowmake linked Gigabyte's product page. Source: @1a2b3c0967, 2026-10-04
  Source: @persona_80337, 2026-10-06
  Source: @voidgiraffe, 2026-10-15
  Source: @voidgiraffe, 2026-10-15

Topology

Each GPU pair sits on its own PCIe switch, so P2P is fast inside a pair and slower between pairs. Check the system block diagram before planning tensor-parallel groups. Source: @cmdrwaka324, 2026-10-26 The G292-Z20 and G292-Z24 are single socket; the 4U G482-Z52 is dual socket, so half the cards would cross the socket to reach the others. Source: @cmdrwaka324, 2026-10-26
Source: @cmdrwaka324, 2026-10-26

Noise

• A YouTube video ("Taming a 12,000 RPM Jet Engine! Gigabyte G292 2U AI Server Fan Tuning") has a Python script that lowers fan speed; the minimum is still about 3750 to 4000 rpm. Source: @a1rm4x, 2026-10-15
  Source: @voidgiraffe, 2026-10-15
  Source: @voidgiraffe, 2026-10-15
• Con3po pins fan control to a thermal target (every card's memory or GPU at 75 C max) instead of a curve, which keeps the fans at the minimum they need. Source: @con3po7016, 2026-10-15
• Not apartment friendly. More in Cooling and power.

Known issues

• EPS adapters do not fit at the back; use EPS-to-EPS cables. Source: @danske1, 2026-10-26 See Cooling and power for EPS pinout warnings.

Related

Platforms, Server BIOS setup, Risers and bifurcation, Gigabyte G481-HA0.

Imported from the cmpunlocker Discord with credit; see Credits.